Sign in to follow this  
Dimos Zagaris

se 2200a ii vs neuman 193 vs miktec cv4

Rate this topic

Recommended Posts

Hello guys ..I would like your advice about a microphone selection Yesterday i tried in my voice the brauner phantom classic and its very soft microphone in my voice Like in this video test

https://youtu.be/BVkFhqoo-Dg

This is another microphone test with se 2200a ii c

https://youtu.be/3y5q6rFLVfI

Its better in my voice cause it has better low end but its little muddy in low mid
like this too 

https://www.youtube.com/watch?v=lfExEPjwc-E

I tried akg 414 but too thin in my voice
also rode nt1, 

I tried jz vintage 11 but its too much warm in my voice

Now im thinkig neumann 193 or se2200 ii with focusrite isa one
Will it change the sound of se2200a ii if i will add focusirite isa one?

Or maybe miktek  cv4?

This is not to promote my channel or get viewS..i just want a microphone like manley or u87 focucused with good low end and great higs..Is this possible?

 

Share this post


Link to post
Share on other sites

You can use one of the more affordable mics and there are plenty of mic emulator plug-ins which will get you to sounding like some of the high dollar mics. Here is a funny thing - high dollar mics often add a certain effect to the voice, mostly by rolling off the high partials, which you can do with EQ, emulators, or both.

Seriously, get a good -12 dB signal in with a regular condenser mic and use a plug-in for "U-87" and a shelf EQ at 10 kHz and no one is going to know the difference. And the one or two that might tell the difference are not music buyers or producers. Performance and the room trump equipment, every time.

 

Share this post


Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this